A List Of Common Errors That People Do With Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not rot or rust like aluminum or timber.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to take the time to ensure that you are doing everything you can to keep your windows in good repair.

For single pane windows it is relatively easy to replace them, and the new window will usually fit inside the frame that was previously installed easily. However when you have double-pane windows that are anchored by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this case, you will need to find some plastic spacers that will assist the new pane to fit perfectly into the frame of the window.

If you plan attempt to remove the window panes yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric, not onto the floor which could cause them to be trampled under.

It's a great idea to tape the gap once the glass has been removed. This will prevent drafts and water from getting into your property until a professional arrives to fix the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap is large, you may want to consider using a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from getting worse.

To fix a sagging window you can try repositioning the hinges. You'll first need to open the windows to get at the frame. Then, you can remove the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and check for an appropriate fit. If you're satisfied with the fit of your window, you can tighten screws to keep them in the right position.

If you are unable to move the hinges, you may have to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are watertight and secure from draughts.

uPVC handles can also loosen up. Often it is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need close the window and then perform a test to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If  window repairs  isn't, you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

It is essential to take action if you awake each day to find a smoky wall and floors that are wet. Water leaks from windows not only lead to the degrading of the structure of your home but also undermine your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the issue is, the old caulking may need to be removed. When it comes to uPVC repair, you must be careful not to over-caulk. This will only make your window harder to clean and lower its energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious cases you might need to consider replacing the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely the problem is related to the seal, not the frame. This can be easily repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open in a breeze It could be hinges at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like any mechanical part hinges will wear out over time. It is very easy to change a window hinge however it is simpler if you have someone to help you hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a certain way or due to improper installation in the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to offer assistance.

It is also important to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is a great method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the risk of a window sticking and help prevent corrosion. The ideal time to do this once a year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. The hinges can also become misaligned due to wear, causing an opening where the sash meets frame. This can be easily repaired by giving them a good clean, but in the event that they are beyond repair it could be necessary to have them re-aligned or replaced. In addition, the interlock could also become unbalanced. This happens on the hinge side and might require to be cleaned. In some cases it is possible to replace these.

The next common reason for draughts are the window seals. They can become worn down or damaged over time, and let air escape through the gaps. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Another option is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and again will lessen the possibility of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. They will help stop cold air from entering and keep your home warm and cozy!

The windows made of upvc can remain a great source of insulation and security in your home with regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it could be more cost-effective to simply replace them rather than repair them. If you are having issues with your upvc windows, it is always recommended to seek assistance from a professional immediately.